New Ford Ohc
RICAMBI FORD, TRANSIT, AUTO, VEICOLI COMMERCIALI, INDUSTRIALI, FORD STORICHE (VINTAGE). MA ANCHE TOYOTA, FIAT, OM, ISUZU, HONDA, MITSUBISHI. Ventola radiatore raffredamento motore 8 pale gialle motore OHC 2,0 Ford Sierra Ford Granda Ford Scorpio senza Aria condizionata dal 10/1984 al 5/1989 radiator fan blade OHC 2,0i 74-85 kW Ford Transit senza aria condizionata e con aria condizionata dal 10/1984 al 8/1991. 6124021 – 85GB8600AB – 85GB0000600AB – 66166 – 6151772. Loggetto in questione si presenta integro, esso è venduto così comè (come da foto allegata). Si avvisa la nostra gentile clientela che. LA MERCE VERRA’ SPEDITA entro 24-48 h (dal lunedì al venerdì, esclusi i giorni festivi) dalla RICEZIONE DEL PAGAMENTO. PER FACILITARE LA VELOCITA’ DELLA SPEDIZIONE SI RACCOMANDA DI FORNIRCI. CODICE FISCALE O PARTITA IVA. NECESSARIO PER POTER REDIGERE LA FATTURA. PER LEGGE LA MERCE NON PUÒ USCIRE DALLA NOSTRA AZIENDA SENZA FATTURA. Il feedback verrà rilasciato solo dopo averlo ricevuto. Disponiamo di un vasto assortimento di ricambi auto ed auto d’epoca, solamente una piccolissima parte è on-line, quindi per ogni necessità o informazione non esitate a contattarci. Sempre disponibili per qualsiasi chiarimento. Indirizzo: Via Alcamo 19-21, 91100 Trapani (TP). Autoforniture Messina Giovanni sempre a vostra disposizione dal 1940. The item “Ventola radiatore raffredamento motore 8 pale gialle motore OHC 2,0 Ford Sierra” is in sale since Wednesday, April 4, 2018. This item is in the category “Auto e moto\ ricambi e accessori\Auto d’epoca\ ricambi\Fiat\Radiatori e ventole”. The seller is “messigiocar” and is located in Trapani, TP. This item can be shipped worldwide.
- Marca: – Senza marca/Generico -
Stub Axle Front Wheel Right Right FORD Transit 2.5 Diesel & 2,0 Ohc Petrol. The description of this item has been automatically translated. Ford , TRANSIT, AUTO, COMMERCIAL, INDUSTRIAL, Ford HISTORICAL PARTS (VINTAGE). BUT ALSO TOYOTA, FIAT, OM, ISUZU, HONDA, MITSUBISHI. Right front wheel spindle Ford Transit 2.5 Diesel and 2,0 Ohc Petrol from 11 / 1985-8 / 1991 type with front leaf spring suspension Spindle front right 86VB3105AC New Genuine Parts Ford. 6137903 – 6152773 – 86VB3107AC – 86VB3105AC. Our kind customers are advised that. REQUIRED TO BE ABLE TO DRAW THE INVOICE. BY LAW THE GOODS CANNOT EXIT FROM OUR COMPANY WITHOUT INVOICE. The feedback will be released only after receiving it. Always available for any clarification. Address: Via Alcamo 19-21, 91100 Trapani (TP). Autoforniture Messina Giovanni always at your disposal since 1940. The item “Stub Axle Front Wheel Right Right FORD Transit 2.5 Diesel & 2,0 Ohc Petrol” is in sale since Monday, April 29, 2019. This item is in the category “Vehicle Parts & Accessories\Car Parts\Other Car Parts”. The seller is “messigiocar” and is located in Trapani, TP. This item can be shipped worldwide.
- Brand: Ford
- Manufacturer Part Number: 6176321
At Kent Cams the difference is in the detail. Their cams are used in most major motorsport events around the world including WRC, WTCC, WSB, BSB, ERC, ETCC & BTCC. This range of Kent Cams are specifically designed for Motorsport / Competition use, and therefore are not ideally suited for use on the public highway. This listing is for a Kent Cams Camshaft (RL32 Rally) to suit the following model(s): Ford Escort 2.0 OHC Pinto Power Band 3000>7750 Rally profile Followers, Springs, Power Pulley, Cam Belt etc also available Please note: Image is for representative purposes only – not your exact cams Kent Cams Part Number = RL32. We are dedicated to ensuring the highest possible quality service to our customers. You can send us a message by using the “Questions and answers” section towards the bottom of the page. Made with love by. The item “Kent Cams Camshaft RL32 Rally Ford Escort 2.0 OHC Pinto” is in sale since Thursday, January 24, 2019. This item is in the category “Vehicle Parts & Accessories\Car Tuning & Styling\Engine, Tuning & Chips\Performance Camshafts”. The seller is “larkspeedperformancecentre” and is located in Leeds, West Yorkshire, England. This item can be shipped worldwide.
- MPN: 284RL32
- Brand: Kent Cams
- EAN: Does not apply
Wossner 2.0 Pinto OHC 8V Non Turbo NA 92.5mm Forged Pistons Set. Compression Ratio: 12.0:1. 92.5mm bore pistons. Wössner are regarded by Europes leading motor sport engine builders as being the piston of choice when building an engine not only to perform, but to withstand the stresses and duresss of competition life. Wössner pistons feature a unique PTFE coating on the skirts and a grade of 4032 Alloy (T6) which allows the engine builder to run a closer piston to bore tolerance then he might do on another make of piston. This helps remove the slapping noise during cold start, common place among engines running forged pistons due to larger then OE bore clearances. The crowns of the pistons are also polished to better resist detonation on a high performance engine. Polishing allows a more even spread of heat inside the chamber. Image is a Stock image. Any Items That Are Out Of Stock Or have Extended Lead Times, May Take Slightly Longer Than Normal. The item “Wossner 2.0 FORD Pinto OHC Non Turbo NA 92.5mm Forged Piston Set” is in sale since Wednesday, November 27, 2019. This item is in the category “Vehicle Parts & Accessories\Car Parts\Engines & Engine Parts\Pistons, Rods & Parts”. The seller is “shopbhp” and is located in Sevenoaks, Kent. This item can be shipped worldwide.
- Type: Piston
- Manufacturer Part Number: Wossner220
- Brand: Wossner
Ford Escort MK2 OHC RS2000 4 Branch Exhaust Manifold 2 Sportex. For this 4-branch manifold to be suitable, the Escort also needs to be fitted with an exhaust system with a 2 bore. The four primary tubes are manufactured from 38mm diameter tubing and the two secondary pipes are 45mm diameter. The manifold is manufactured from aluminised mild-steel. Sportex are now making these manifolds on state of the art CNC bending machines so you can be sure of a perfect fit! Ideal for’Fast-road’ or club-competition. Escort performance exhausts have come a long way since the 70’s! We also sell single, twin-box systems, and full race/rally exhausts for the Escort Mk1 & 2. The item “Ford Escort MK2 OHC RS2000 4 Branch Exhaust Manifold 2 Sportex” is in sale since Thursday, January 28, 2021. This item is in the category “Vehicle Parts & Accessories\Car Tuning & Styling\Performance Exhaust\Other Performance Exhausts”. The seller is “on-lineautosport” and is located in Lichfield, Staffordshire. This item can be shipped to United Kingdom.
- Brand: Does Not Apply
- Intended Use: Modification/ Enhancement
- Manufacturer: Ford
- Manufacturer Part Number: Does Not Apply
- Model/ Series: Escort MK1
- MPN: Does Not Apply
- Subtype: Exhaust Manifolds
- Type: Exhaust
Wiseco Pistons After nearly 70 years in the business, the name Wiseco has become synonymous with pistons, especially pistons for off-road racing and riding. Wiseco has attained that instant brand recognition by being one of the few manufacturers of forged pistons within the USA. We try to respond to messages within 24 hours. If you do not receive a response within 24 hours please send us another message. Please be aware that some of our items are made to order and can carry up to a 14 day lead time. Information on lead times for all made to order items will be included in the Product Description. Upon receipt of your order you will be asked to sign for the goods received in good condition. The item “Wiseco Piston Kit FOR FORD 2.0 OHC/PINTO 93.5MM BORE/ 2.69MM OS & 9.2 CR” is in sale since Tuesday, November 12, 2019. This item is in the category “Vehicle Parts & Accessories\Car Tuning & Styling\Engine, Tuning & Chips\Performance Pistons & Rings”. The seller is “wg_motorparts” and is located in Sittingbourne, ME10 2FB, United Kingdom. This item can be shipped worldwide.
- Manufacturer Part Number: Wiseco-10171
- Brand: Wiseco
- Classic Car Part: No
- Custom Bundle: No
- Bundle Description: Does not apply
- Modified Item: No
- Reference OE/OEM Number: Does not apply
- Interchange Part Number: Does not apply
- Modification Description: Does not apply
- Other Part Number: Does not apply
- Mileage: Does not apply
- Warranty Period: Refer to Manufacturers Warranty Guidelines
- Vehicle Identification Number (VIN): Does not apply
- Grade: Does not apply
- Unit Quantity: 1
- Unit Type: Unit
Wossner FORD 2.0 Pinto OHC 8V NA Long Rod 91.75mm Forged Pistons & PEC Rods. Compression Ratio: 12.0:1. 91.75mm bore pistons. Con Rod Length C/C. 4x Wossner forged pistons. 4x Wossner piston rings sets. 4x Wossner gudgeon pins. 4x Wossner circlips sets. 1x PEC piston installation guideline sheet. 4x PEC forged steel connecting rods – H-beam. 8x ARP 2000 series. 1x ARP fastener assembly lubricant. 1x PEC connecting rod installation guideline sheet. Wössner are regarded by Europes leading motor sport engine builders as being the piston of choice when building an engine not only to perform, but to withstand the stresses and duresss of competition life. Wössner pistons feature a unique PTFE coating on the skirts and a grade of 4032 Alloy (T6) which allows the engine builder to run a closer piston to bore tolerance then he might do on another make of piston. This helps remove the slapping noise during cold start, common place among engines running forged pistons due to larger then OE bore clearances. The crowns of the pistons are also polished to better resist detonation on a high performance engine. Polishing allows a more even spread of heat inside the chamber which will help prevent hot spots on piston crowns. Price includes all piston rings and gudgeon pins. PEC rods are designed to withstand roughly 225hp per cylinder (typically 900hp on most 4cyl engines) and on the ARP 2000 series 3/8 bolts normally provided & have an 8,500 RPM safe operating limit (engine specific). In some cases, we recommend using the ARP custom age bolts available from us. This increases the hp threshold to 250hp per cylinder and raises the RPM limit to 9,000 however as every engine is different, these numbers are not guaranteed for every configuration. Prolonged high RPM’s for drifting, or sudden bursts of torque for drag racing (as two examples) will warrant the use of the custom age bolts to help retain the clamping force between the big end cap and the connecting rod. H-Beam and I-Beam section connecting rods are forged from AISI 4340 (En24) steel. Heat treated to HRC 35-38 and then shot peened for a higher fatigue strength. Small ends are bushed for a fully floating pin and big ends are fitted with high quality ARP fasteners with different specification bolts available depending on the level of performance required. Manufactured from forgings originally produced in Sweden, PEC connecting rods have offered engine builders and tuners a cost efficient and yet high performing solution to a wide variety engine building problems. Image is a Stock image. Any Items That Are Out Of Stock Or have Extended Lead Times, May Take Slightly Longer Than Normal. The item “Wossner FORD 2.0 Pinto OHC 8V NA Long Rod 91.75mm Forged Pistons & PEC Rods” is in sale since Thursday, December 12, 2019. This item is in the category “Vehicle Parts & Accessories\Car Parts\Engines & Engine Parts\Pistons, Rods & Parts”. The seller is “shopbhp” and is located in Sevenoaks, Kent. This item can be shipped worldwide.
- Type: Piston
- Manufacturer Part Number: Wossner120
- Brand: Wossner
Wossner FORD 2.0 Pinto OHC 8V NA Long Rod 91.5mm Forged Pistons & PEC Rods. Compression Ratio: 12.0:1. 91.5mm bore pistons. Con Rod Length C/C. 4x Wossner forged pistons. 4x Wossner piston rings sets. 4x Wossner gudgeon pins. 4x Wossner circlips sets. 1x PEC piston installation guideline sheet. 4x PEC forged steel connecting rods – H-beam. 8x ARP 2000 series. 1x ARP fastener assembly lubricant. 1x PEC connecting rod installation guideline sheet. Wössner are regarded by Europes leading motor sport engine builders as being the piston of choice when building an engine not only to perform, but to withstand the stresses and duresss of competition life. Wössner pistons feature a unique PTFE coating on the skirts and a grade of 4032 Alloy (T6) which allows the engine builder to run a closer piston to bore tolerance then he might do on another make of piston. This helps remove the slapping noise during cold start, common place among engines running forged pistons due to larger then OE bore clearances. The crowns of the pistons are also polished to better resist detonation on a high performance engine. Polishing allows a more even spread of heat inside the chamber which will help prevent hot spots on piston crowns. Price includes all piston rings and gudgeon pins. PEC rods are designed to withstand roughly 225hp per cylinder (typically 900hp on most 4cyl engines) and on the ARP 2000 series 3/8 bolts normally provided & have an 8,500 RPM safe operating limit (engine specific). In some cases, we recommend using the ARP custom age bolts available from us. This increases the hp threshold to 250hp per cylinder and raises the RPM limit to 9,000 however as every engine is different, these numbers are not guaranteed for every configuration. Prolonged high RPM’s for drifting, or sudden bursts of torque for drag racing (as two examples) will warrant the use of the custom age bolts to help retain the clamping force between the big end cap and the connecting rod. H-Beam and I-Beam section connecting rods are forged from AISI 4340 (En24) steel. Heat treated to HRC 35-38 and then shot peened for a higher fatigue strength. Small ends are bushed for a fully floating pin and big ends are fitted with high quality ARP fasteners with different specification bolts available depending on the level of performance required. Manufactured from forgings originally produced in Sweden, PEC connecting rods have offered engine builders and tuners a cost efficient and yet high performing solution to a wide variety engine building problems. Image is a Stock image. Any Items That Are Out Of Stock Or have Extended Lead Times, May Take Slightly Longer Than Normal. The item “Wossner FORD 2.0 Pinto OHC 8V NA Long Rod 91.5mm Forged Pistons & PEC Rods” is in sale since Thursday, December 12, 2019. This item is in the category “Vehicle Parts & Accessories\Car Parts\Engines & Engine Parts\Pistons, Rods & Parts”. The seller is “shopbhp” and is located in Sevenoaks, Kent. This item can be shipped worldwide.
- Type: Piston
- Manufacturer Part Number: Wossner120
- Brand: Wossner
Wossner FORD 2.0 Pinto OHC 8V Non Turbo NA 92mm Forged Pistons & PEC Rods Set. Compression Ratio: 12.0:1. Con Rod Length C/C. 4x Wossner forged pistons. 4x Wossner piston rings sets. 4x Wossner gudgeon pins. 4x Wossner circlips sets. 1x PEC piston installation guideline sheet. 4x PEC forged steel connecting rods – H-beam. 8x ARP 2000 series. 1x ARP fastener assembly lubricant. 1x PEC connecting rod installation guideline sheet. Wössner are regarded by Europes leading motor sport engine builders as being the piston of choice when building an engine not only to perform, but to withstand the stresses and duresss of competition life. Wössner pistons feature a unique PTFE coating on the skirts and a grade of 4032 Alloy (T6) which allows the engine builder to run a closer piston to bore tolerance then he might do on another make of piston. This helps remove the slapping noise during cold start, common place among engines running forged pistons due to larger then OE bore clearances. The crowns of the pistons are also polished to better resist detonation on a high performance engine. Polishing allows a more even spread of heat inside the chamber which will help prevent hot spots on piston crowns. Price includes all piston rings and gudgeon pins. PEC rods are designed to withstand roughly 225hp per cylinder (typically 900hp on most 4cyl engines) and on the ARP 2000 series 3/8 bolts normally provided & have an 8,500 RPM safe operating limit (engine specific). In some cases, we recommend using the ARP custom age bolts available from us. This increases the hp threshold to 250hp per cylinder and raises the RPM limit to 9,000 however as every engine is different, these numbers are not guaranteed for every configuration. Prolonged high RPM’s for drifting, or sudden bursts of torque for drag racing (as two examples) will warrant the use of the custom age bolts to help retain the clamping force between the big end cap and the connecting rod. H-Beam and I-Beam section connecting rods are forged from AISI 4340 (En24) steel. Heat treated to HRC 35-38 and then shot peened for a higher fatigue strength. Small ends are bushed for a fully floating pin and big ends are fitted with high quality ARP fasteners with different specification bolts available depending on the level of performance required. Manufactured from forgings originally produced in Sweden, PEC connecting rods have offered engine builders and tuners a cost efficient and yet high performing solution to a wide variety engine building problems. Image is a Stock image. Any Items That Are Out Of Stock Or have Extended Lead Times, May Take Slightly Longer Than Normal. The item “Wossner FORD 2.0 Pinto OHC 8V Non Turbo NA 92mm Forged Pistons & PEC Rods Set” is in sale since Thursday, December 12, 2019. This item is in the category “Vehicle Parts & Accessories\Car Parts\Engines & Engine Parts\Pistons, Rods & Parts”. The seller is “shopbhp” and is located in Sevenoaks, Kent. This item can be shipped worldwide.
- Type: Piston
- Manufacturer Part Number: Wossner220
- Brand: Wossner