Tags » zo5-34

Ford Escort MK1 MK2 Capri Ohc Pinto Mocal 5/8BSP Ölkühler Montagesatz ZO5-3/4

Ford Escort MK1 MK2 Capri Ohc Pinto Mocal 5/8BSP Ölkühler Montagesatz ZO5-3/4
Ford Escort MK1 MK2 Capri Ohc Pinto Mocal 5/8BSP Ölkühler Montagesatz ZO5-3/4
Ford Escort MK1 MK2 Capri Ohc Pinto Mocal 5/8BSP Ölkühler Montagesatz ZO5-3/4
Ford Escort MK1 MK2 Capri Ohc Pinto Mocal 5/8BSP Ölkühler Montagesatz ZO5-3/4
Ford Escort MK1 MK2 Capri Ohc Pinto Mocal 5/8BSP Ölkühler Montagesatz ZO5-3/4

Ford Escort MK1 MK2 Capri Ohc Pinto Mocal 5/8BSP Ölkühler Montagesatz ZO5-3/4
Ford Escort MK1 MK2 Capri Ohc Pinto Mocal 5/8BSP Ölkühler Montagesatz ZO5-3/4. Das Datenblatt dieses Produkts wurde ursprünglich auf Englisch verfasst. Unten finden Sie eine automatische Übersetzung ins Deutsche. Sollten Sie irgendwelche Fragen haben, kontaktieren Sie uns. FORD OHC PINTO 5 / 8BSP ÖLKÜHLER-EINBAUSATZ. Motoren mit Metalldrehzahl nur bei Ölfiltern. Escort Mk1 1.6 / 2.0 (OHC Pinto). Escort Mk2 1.6 / 2.0 (OHC Pinto). Capri 2.8i / Cosworth V6. Nicht für Papierelement- / Patronenölfilter geeignet. NUR EINBAUSATZ (KEIN ÖLKÜHLER ENTHALTEN) – NUR KOMPATIBEL MIT 5 / 8BSP MOCAL-KÜHLERN. ÖLKÜHLER VERFÜGBAR – BITTE SEHEN SIE UNSERE EINZELTEILE. 3 / 4unf Mittelschraube. Schwarzer 5/8 ID Hochtemperatur- / Druckölschlauch. 2x 5 / 8bsp Sandwichplatte Stecker / Stecker-Adapter. 2x 5 / 8bsp gerade Gewerkschaften. 2x 5 / 8bsp 90 ° Anschlüsse. 8x Muttern / Schrauben. Bei sehr kaltem / nassem Wetter kann eine Überkühlung des Öls durch Hinzufügen eines in die Sandwichplatte eingebauten Thermostats vermieden werden. Oder die Sandwichplatte kann mit einem 1 / 8nptf-Anschluss geliefert werden. Der mitgelieferte Schlauch und die Armaturen sind zur Selbstmontage bestimmt. Einmal zusammengebaut haben die Schläuche ein schickes / professionelles Aussehen. Diese innovative Lösung wird nur durch die Verwendung von speziell für diesen Zweck entwickelten Schläuchen und Armaturen erreicht. Daher ist es von paramount dass die richtigen Mocal-Armaturen (rotes Band) verwendet werden. Es ist beruhigend schwierig, die Armaturen an den Schlauch anzuschließen: Tauchen Sie das Schlauchende in heißes Wasser, halten Sie die Armatur in einen Schraubstock und tragen Sie WD40 (oder ähnliches) auf die Armatur und den Schlauch auf. Schieben Sie den Schlauch mit einem Handgriff über die Armatur, bevor er abkühlt. Nach korrekter Montage muss der Schlauch abgeschnitten werden, um die Armatur zu entfernen. Schlauchschellen müssen zwischen den Widerhaken der Armaturen angebracht werden. Kit ist auch mit blauem Aeroquip FC332-10 Hochtemperatur- / Druckölschlauch ohne Aufpreis erhältlich – Bitte bei Zahlung angeben. Das Kit kann mit einem zusätzlichen Schlauch von 1 oder 2 Metern geliefert werden. Für Upgrades von Sandwichplatten und Schläuchen kaufen Sie bitte den Artikel und fordern Sie insgesamt an VOR Zahlung ausgeführt. Eine geänderte Rechnung wird dann gesendet. Entwickelt für den Motorsport. Anweisungen sind nicht enthalten. (Einige Montagetipps und Anzugsmomente sind enthalten). BITTE MEINE SHOP-ARTIKEL ANZEIGEN. Wenn ein Artikel nicht innerhalb von 1 Werktag versandt werden kann, werden wir Sie kontaktieren. (Das Versanddatum wird auf dem Paketadressenetikett abgedruckt). BITTE BEACHTEN SIE: Wir können nicht für Lieferfirmen / Kuriere verantwortlich gemacht werden, die nicht rechtzeitig liefern. Aufgrund von Adressanfragen / schlechtem Wetter / Standortfehlern usw. Während des Feedback-Prozesses werden Sie gebeten, uns bezüglich der Versandzeit NICHT der Lieferzeit zu bewerten. BITTE BEACHTEN SIE EINZELTEIL & PORTO PREISE BEINHALTEN MWST. (Artikel können nicht ohne Mehrwertsteuer verkauft oder gebucht werden). PORTOPREISE BEINHALTEN AUCH VERPACKUNG / MATERIAL UND SONSTIGE KOSTEN Frankierung, Postabholservice usw. Wir geben unser Bestes, um vernünftige und echte Fragen während unserer normalen Bürozeiten (Mo-Fr 9-5) zu beantworten. Bitte beachten Sie jedoch, dass wir nicht über genaue Kenntnisse aller Marken und Modelle verfügen oder über persönliche Erfahrung in der Montage / Verwendung verfügen Alle unsere Produkte. Produkte passen nur zu den angegebenen Modellen wenn Produkte zu anderen Modellen passen, ist dies zu unseren Gunsten! Sind nicht für ein Modell konzipiert. Die vorgeschlagenen Modelle sind für das aufgelistete Produkt geeignet. Bitte überprüfen Sie die angegebenen Spezifikationen / Größen. Bitte haben Sie vor dem Kauf Verständnis dafür, was Sie kaufen. Bitte geben Sie uns 24 Stunden Zeit, um Ihre Frage zu beantworten. Bitte seien Sie vernünftig – wir geben oder empfangen nur positives Feedback. Wenn Sie ein Problem mit Ihrer Bestellung haben, setzen Sie sich bitte mit uns in Verbindung und geben Sie uns die Möglichkeit, die Situation zu korrigieren Fehler passieren zwar nicht oft, aber sie passieren! Bitte beachten Sie, dass auf allen Paketen ein Versanddatum angegeben ist. Bitte beachten Sie auch den Versand. Innerhalb von 3 Werktagen. Zeiten auf der Auflistung angegeben. Bitte beachten Sie bei den Versandkosten die Verpackungszeit, das Material und die Mehrwertsteuer. Die meisten unserer Produkte sind NICHT für die Selbstmontage bestimmt und in einigen Fällen sind Anweisungen nicht enthalten – wir geben dies an, wenn zutreffend. Rückmeldungen werden nicht priorisiert, da sie zeitaufwändig sind und nach dem Absenden der Bestellungen und Beantwortung von Fragen in Blöcken von jeweils 2-300 erfolgen. Der Versand von Bestellungen und die Beantwortung von Fragen sind unsere erste und zweite Priorität. Wir versichern Ihnen, dass wir Ihr Feedback so bald wie möglich hinterlassen werden. Vor allem möchten wir, dass Sie ein positives Einkaufserlebnis haben und wieder bei uns einkaufen. Das Bild zeigt, was Sie erhalten, wenn Sie diesen Artikel kaufen. ECHTER MOCAL FORD OHC PINTO 5 / 8BSP ÖLKÜHLER-EINBAUSATZ Motoren mit Metalldrehzahl nur bei Ölfiltern PASSEND FÜR: Escort Mk1 1.6 / 2.0 (OHC Pinto) Escort Mk2 1.6 / 2.0 (OHC Pinto) Capri 2.8i / Cosworth V6 Nicht für Papierelement- / Patronenölfilter geeignet ÖLKÜHLER VERFÜGBAR – BITTE SEHEN SIE UNSERE EINZELTEILE KIT ENTHÄLT: Ölfilter-Sandwichplatte ca. FORD OHC PINTO 5/8BSP OIL COOLER FITTING KIT. Engines With Metal Spin On Oil Filters Only. Escort Mk1 1.6/2.0 (OHC Pinto). Escort Mk2 1.6/2.0 (OHC Pinto). Not suitable for paper element/cartridge oil filters. FITTING KIT ONLY (NO OIL COOLER INCLUDED) – COMPATIBLE WITH 5/8BSP MOCAL COOLERS ONLY. OIL COOLERS AVAILABLE – PLEASE SEE OUR SHOP ITEMS. Oil filter sandwich plate. Black 5/8 ID high temperature/pressure oil hose. 2x 5/8bsp sandwich plate male/male adaptors. 2x 5/8bsp straight unions. 2x 5/8bsp 90° unions. In very cold/wet weather over cooling of the oil can be avoided by the addition of a thermostat built into the sandwich plate. Or the sandwich plate can be supplied with one 1/8nptf gauge port. The hose & fittings supplied is designed for self assembly. Once assembled the hoses have a smart/professional appearance. This innovative solution is only achieved by using hose & fittings specially designed for the purpose, therefore is it paramount that the correct Mocal (red band) fittings are used. It is reassuringly hard to fit the fittings to the hose: Dip the hose end in hot water, hold the fitting in a vice, apply WD40 (or similar) to the fitting & hose. Push the hose over the fitting in one quick action before it cools. Once assembled correctly the hose will have to be cut to remove the fitting. Hose clips need to be fitted in between the barbs of the fittings. The kit can be supplied with an extra 1 or 2 meters of hose. An amended invoice will then be sent. Designed for Motorsport use. No instructions are included. (Some fitting tips & tightening torques are included). PLEASE VIEW MY SHOP ITEMS. (The despatch date will be printed on the parcel address label). (Due to address queries/bad weather/locational errors etc). We are happy to do our best to answer sensible, genuine questions during our normal office hours (Mon-Fri 9-5), however please note we do not have intimate knowledge of all makes & models or have personal experience of fitting/using all our products. Products only fit models stated if products fit other models its in our favour to say so! Are not designed for any one model. Models suggested are appropriate for the product listed but please check specs/sizes where stated. Please allow 24h for us to respond to your question. Please also note the despatch. Times stated on the listing. Most of our products are NOT designed for DIY fitting and in some cases instructions are not included – we state this when applicable. We do not prioritise feedback, due the time consuming nature of the feedback we do them in blocks of 2-300 at a time after orders have been sent & questions answered. Despatching orders & answering questions are our first & second priority. Please be assured feedback will be left at our earliest convenience. The item “Ford Escort MK1 MK2 Capri Ohc Pinto Mocal 5/8BSP Ölkühler Montagesatz ZO5-3/4″ is in sale since Tuesday, August 1, 2017. This item is in the category “Auto & Motorrad\ Teile\Auto-Ersatz- & -Reparaturteile\Kühlung\Ölkühler”. The seller is “mattyzx” and is located in Dorking,Surrey. This item can be shipped worldwide.
  • Oldtimer Autoteil: Ja
  • Marke: Mocal
  • Hersteller: Markenlos
  • Herstellernummer: ZO5-3/4UNF
  • Produkttyp: Ölkühler Satz
  • Herstellungsland und -region: Großbritannien

Ford Escort MK1 MK2 Capri Ohc Pinto Mocal 5/8BSP Ölkühler Montagesatz ZO5-3/4

Ford Escort Mk1 Mk2 Capri Ohc Pinto Mocal 5/8bsp Oil Cooler Fitting Kit Zo5-3/4

Ford Escort Mk1 Mk2 Capri Ohc Pinto Mocal 5/8bsp Oil Cooler Fitting Kit Zo5-3/4
Ford Escort Mk1 Mk2 Capri Ohc Pinto Mocal 5/8bsp Oil Cooler Fitting Kit Zo5-3/4
Ford Escort Mk1 Mk2 Capri Ohc Pinto Mocal 5/8bsp Oil Cooler Fitting Kit Zo5-3/4
Ford Escort Mk1 Mk2 Capri Ohc Pinto Mocal 5/8bsp Oil Cooler Fitting Kit Zo5-3/4

Ford Escort Mk1 Mk2 Capri Ohc Pinto Mocal 5/8bsp Oil Cooler Fitting Kit Zo5-3/4
Ford OHC PINTO 5/8BSP OIL COOLER FITTING KIT. Engines With Metal Spin On Oil Filters Only. Escort Mk1 1.6/2.0 (OHC Pinto). Escort Mk2 1.6/2.0 (OHC Pinto). Capri 2.8i / Cosworth V6. Not suitable for paper element/cartridge oil filters. FITTING KIT ONLY (NO OIL COOLER INCLUDED) – COMPATIBLE WITH 5/8BSP MOCAL COOLERS ONLY. OIL COOLERS AVAILABLE – PLEASE SEE OUR SHOP ITEMS. Oil filter sandwich plate. Black 5/8 ID high temperature/pressure oil hose. 2x 5/8bsp sandwich plate male/male adaptors. 2x 5/8bsp straight unions. 2x 5/8bsp 90° unions. In very cold/wet weather over cooling of the oil can be avoided by the addition of a thermostat built into the sandwich plate. Or the sandwich plate can be supplied with one 1/8nptf gauge port. The hose & fittings supplied is designed for self assembly. Once assembled the hoses have a smart/professional appearance. This innovative solution is only achieved by using hose & fittings specially designed for the purpose, therefore is it PARAMOUNT that the correct Mocal (red band) fittings are used. It is reassuringly hard to fit the fittings to the hose: Dip the hose end in hot water, hold the fitting in a vice, apply WD40 (or similar) to the fitting & hose. Push the hose over the fitting in one quick action before it cools. Once assembled correctly the hose will have to be cut to remove the fitting. Hose clips need to be fitted in between the barbs of the fittings. The kit can be supplied with an extra 1 or 2 meters of hose. An amended invoice will then be sent. Designed for Motorsport use. No instructions are included. (Some fitting tips & tightening torques are included). PLEASE VIEW MY SHOP ITEMS. (The despatch date will be printed on the parcel address label). (Due to address queries/bad weather/locational errors etc). We are happy to do our best to answer sensible, genuine questions during our normal office hours (Mon-Fri 9-5), however please note we do not have intimate knowledge of all makes & models or have personal experience of fitting/using all our products. Products only fit models stated if products fit other models its in our favour to say so! Are not designed for any one model. Models suggested are appropriate for the product listed but please check specs/sizes where stated. Please allow 24h for us to respond to your question. Please also note the despatch. Times stated on the listing. Most of our products are NOT designed for DIY fitting and in some cases instructions are not included – we state this when applicable. We do not prioritise feedback, due the time consuming nature of the feedback we do them in blocks of 2-300 at a time after orders have been sent & questions answered. Despatching orders & answering questions are our first & second priority. Please be assured feedback will be left at our earliest convenience. The item “FORD ESCORT MK1 MK2 CAPRI OHC PINTO MOCAL 5/8BSP OIL COOLER FITTING KIT ZO5-3/4″ is in sale since Tuesday, August 1, 2017. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Cooling Systems\Other”. The seller is “mattyzx” and is located in Dorking,Surrey. This item can be shipped worldwide.
  • Manufacturer Part Number: Does Not Apply
  • Brand: Mocal

Ford Escort Mk1 Mk2 Capri Ohc Pinto Mocal 5/8bsp Oil Cooler Fitting Kit Zo5-3/4

Ford Escort Mk1 Mk2 Capri Ohc Pinto Mocal 5/8bsp Oil Cooler Fitting Kit Zo5-3/4

Ford Escort Mk1 Mk2 Capri Ohc Pinto Mocal 5/8bsp Oil Cooler Fitting Kit Zo5-3/4
Ford Escort Mk1 Mk2 Capri Ohc Pinto Mocal 5/8bsp Oil Cooler Fitting Kit Zo5-3/4
Ford Escort Mk1 Mk2 Capri Ohc Pinto Mocal 5/8bsp Oil Cooler Fitting Kit Zo5-3/4
Ford Escort Mk1 Mk2 Capri Ohc Pinto Mocal 5/8bsp Oil Cooler Fitting Kit Zo5-3/4

Ford Escort Mk1 Mk2 Capri Ohc Pinto Mocal 5/8bsp Oil Cooler Fitting Kit Zo5-3/4
Ford OHC PINTO 5/8BSP OIL COOLER FITTING KIT. Engines With Metal Spin On Oil Filters Only. Escort Mk1 1.6/2.0 (OHC Pinto). Escort Mk2 1.6/2.0 (OHC Pinto). Capri 2.8i / Cosworth V6. Not suitable for paper element/cartridge oil filters. FITTING KIT ONLY (NO OIL COOLER INCLUDED) – COMPATIBLE WITH 5/8BSP MOCAL COOLERS ONLY. OIL COOLERS AVAILABLE – PLEASE SEE OUR SHOP ITEMS. Oil filter sandwich plate. Black 5/8 ID high temperature/pressure oil hose. 2x 5/8bsp sandwich plate male/male adaptors. 2x 5/8bsp straight unions. 2x 5/8bsp 90° unions. In very cold/wet weather over cooling of the oil can be avoided by the addition of a thermostat built into the sandwich plate. Or the sandwich plate can be supplied with one 1/8nptf gauge port. The hose & fittings supplied is designed for self assembly. Once assembled the hoses have a smart/professional appearance. This innovative solution is only achieved by using hose & fittings specially designed for the purpose, therefore is it PARAMOUNT that the correct Mocal (red band) fittings are used. It is reassuringly hard to fit the fittings to the hose: Dip the hose end in hot water, hold the fitting in a vice, apply WD40 (or similar) to the fitting & hose. Push the hose over the fitting in one quick action before it cools. Once assembled correctly the hose will have to be cut to remove the fitting. Hose clips need to be fitted in between the barbs of the fittings. The kit can be supplied with an extra 1 or 2 meters of hose. An amended invoice will then be sent. Designed for Motorsport use. No instructions are included. (Some fitting tips & tightening torques are included). PLEASE VIEW MY SHOP ITEMS. (The despatch date will be printed on the parcel address label). (Due to address queries/bad weather/locational errors etc). We are happy to do our best to answer sensible, genuine questions during our normal office hours (Mon-Fri 9-5), however please note we do not have intimate knowledge of all makes & models or have personal experience of fitting/using all our products. Products only fit models stated if products fit other models its in our favour to say so! Are not designed for any one model. Models suggested are appropriate for the product listed but please check specs/sizes where stated. Please allow 24h for us to respond to your question. Please also note the despatch. Times stated on the listing. Most of our products are NOT designed for DIY fitting and in some cases instructions are not included – we state this when applicable. We do not prioritise feedback, due the time consuming nature of the feedback we do them in blocks of 2-300 at a time after orders have been sent & questions answered. Despatching orders & answering questions are our first & second priority. Please be assured feedback will be left at our earliest convenience. The item “FORD ESCORT MK1 MK2 CAPRI OHC PINTO MOCAL 5/8BSP OIL COOLER FITTING KIT ZO5-3/4″ is in sale since Tuesday, August 1, 2017. This item is in the category “Vehicle Parts & Accessories\Car & Truck Parts\Cooling Systems\Oil Coolers”. The seller is “mattyzx” and is located in Dorking,Surrey. This item can be shipped worldwide.
  • Classic Car Part: Yes
  • Brand: Mocal
  • Manufacturer Part Number: ZO5-3/4UNF
  • Country/Region of Manufacture: United Kingdom
  • Type: Oil Cooler Kit

Ford Escort Mk1 Mk2 Capri Ohc Pinto Mocal 5/8bsp Oil Cooler Fitting Kit Zo5-3/4

Ford Escort Mk1 Mk2 Capri Ohc Pinto Mocal 5/8bsp Oil Cooler Fitting Kit Zo5-3/4

Ford Escort Mk1 Mk2 Capri Ohc Pinto Mocal 5/8bsp Oil Cooler Fitting Kit Zo5-3/4
Ford Escort Mk1 Mk2 Capri Ohc Pinto Mocal 5/8bsp Oil Cooler Fitting Kit Zo5-3/4
Ford Escort Mk1 Mk2 Capri Ohc Pinto Mocal 5/8bsp Oil Cooler Fitting Kit Zo5-3/4
Ford Escort Mk1 Mk2 Capri Ohc Pinto Mocal 5/8bsp Oil Cooler Fitting Kit Zo5-3/4
Ford Escort Mk1 Mk2 Capri Ohc Pinto Mocal 5/8bsp Oil Cooler Fitting Kit Zo5-3/4

Ford Escort Mk1 Mk2 Capri Ohc Pinto Mocal 5/8bsp Oil Cooler Fitting Kit Zo5-3/4
FORD OHC PINTO 5/8BSP OIL COOLER FITTING KIT. Engines With Metal Spin On Oil Filters Only. Escort Mk1 1.6/2.0 (OHC Pinto). Escort Mk2 1.6/2.0 (OHC Pinto). Capri 2.8i / Cosworth V6. Not suitable for paper element/cartridge oil filters. FITTING KIT ONLY (NO OIL COOLER INCLUDED) – COMPATIBLE WITH 5/8BSP MOCAL COOLERS ONLY. OIL COOLERS AVAILABLE – PLEASE SEE OUR SHOP ITEMS. Oil filter sandwich plate. Black 5/8 ID high temperature/pressure oil hose. 2x 5/8bsp sandwich plate male/male adaptors. 2x 5/8bsp straight unions. 2x 5/8bsp 90° unions. In very cold/wet weather over cooling of the oil can be avoided by the addition of a thermostat built into the sandwich plate. Or the sandwich plate can be supplied with one 1/8nptf gauge port. The hose & fittings supplied is designed for self assembly. Once assembled the hoses have a smart/professional appearance. This innovative solution is only achieved by using hose & fittings specially designed for the purpose, therefore is it paramount that the correct Mocal (red band) fittings are used. It is reassuringly hard to fit the fittings to the hose: Dip the hose end in hot water, hold the fitting in a vice, apply WD40 (or similar) to the fitting & hose. Push the hose over the fitting in one quick action before it cools. Once assembled correctly the hose will have to be cut to remove the fitting. Hose clips need to be fitted in between the barbs of the fittings. The kit can be supplied with an extra 1 or 2 meters of hose. An amended invoice will then be sent. Designed for Motorsport use. No instructions are included. (Some fitting tips & tightening torques are included). PLEASE VIEW MY SHOP ITEMS. (The despatch date will be printed on the parcel address label). (Due to address queries/bad weather/locational errors etc). We are happy to do our best to answer sensible, genuine questions during our normal office hours (Mon-Fri 9-5), however please note we do not have intimate knowledge of all makes & models or have personal experience of fitting/using all our products. Products only fit models stated if products fit other models its in our favour to say so! Are not designed for any one model. Models suggested are appropriate for the product listed but please check specs/sizes where stated. Please allow 24h for us to respond to your question. Please also note the despatch. Times stated on the listing. Most of our products are NOT designed for DIY fitting and in some cases instructions are not included – we state this when applicable. We do not prioritise feedback, due the time consuming nature of the feedback we do them in blocks of 2-300 at a time after orders have been sent & questions answered. Despatching orders & answering questions are our first & second priority. Please be assured feedback will be left at our earliest convenience. The item “FORD ESCORT MK1 MK2 CAPRI OHC PINTO MOCAL 5/8BSP OIL COOLER FITTING KIT ZO5-3/4″ is in sale since Tuesday, August 1, 2017. This item is in the category “Vehicle Parts & Accessories\Car Parts\Engine Cooling\Oil Coolers”. The seller is “mattyzx” and is located in Dorking,Surrey. This item can be shipped worldwide.
  • Country/Region of Manufacture: United Kingdom
  • Type: Oil Cooler Kit
  • Manufacturer Part Number: ZO5-3/4UNF
  • Classic Car Part: Yes
  • Brand: Mocal

Ford Escort Mk1 Mk2 Capri Ohc Pinto Mocal 5/8bsp Oil Cooler Fitting Kit Zo5-3/4